Stainless Steel Return Bend Fittings

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 304,that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

Stainless Steel Return Bend Fitting 304 is a sort of pipe fitting which is utilized as an association point between two lengths of funnels to deliver an adjustment toward stream in the pipe, as a rule at an edge of 180°, 180° or 180°. The short sweep Return Bends have an inside to end remove that is 1.5 occasions the NPS in inches (R=1.5D), while the short span is equivalent to the NPS in inches (R=1.0D). Short sweep Return Bends are commonly utilized in tight regions, and short range Return Bends are utilized when space is accessible and stream is increasingly basic. Beginning Pipe and Tubes can likewise make and supply carbon steel Return Bends and hardened steel Return Bends in non-standard size points, for example, 60°, 100°, 120° or 150°. The finishes of might be machined for butt welding, strung (typically female), or socketed, and so on. At the point when the two finishes contrast in size, the fitting is known as a diminishing Return Bend or reducer Return Bend. Incipient Pipe and Tubes can produce Return Bends with Nominal Pipe Sizes running from 1/2" to 48". Divider Thickness of 180° Short Radius Return Bend Not under 87.5% of Nominal Wall Thickness. Timetable running from Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and so forth.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 316,that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

180 degree U-twist fittings gives quick, clean and secure associations. This 180 degree u-twist is utilized to alter course in specific applications inside the sustenance handling, drink and dairy businesses.

• Standard completes (No. 7 ID and OD)
• Clean tubing and fittings are delivered to 3-A Sanitary Standards
• Material test reports accessible
• Assembling office is ISO 9001:2008
• Autonomous lab confirmation that fittings meet appropriate substance and physical properties

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 317, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.


stainless steel return bends fittings 317, is a sort of pipe fitting which is utilized as an association point between two lengths of funnels to deliver an adjustment toward stream in the pipe, as a rule at an edge of 180°, 180° or 180°. The short sweep Return Bends have an inside to end remove that is 1.5 occasions the NPS in inches (R=1.5D), while the short span is equivalent to the NPS in inches (R=1.0D). Short sweep Return Bends are commonly utilized in tight regions, and short range Return Bends are utilized when space is accessible and stream is increasingly basic. Beginning Pipe and Tubes can likewise make and supply carbon steel Return Bends and hardened steel Return Bends in non-standard size points, for example, 60°, 100°, 120° or 150°. The finishes of might be machined for butt welding, strung (typically female), or socketed, and so on. At the point when the two finishes contrast in size, the fitting is known as a diminishing Return Bend or reducer Return Bend. Incipient Pipe and Tubes can produce Return Bends with Nominal Pipe Sizes running from 1/2" to 48". Divider Thickness of 180° Short Radius Return Bend Not under 87.5% of Nominal Wall Thickness. Timetable running from Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and so forth.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 310, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.


Stainless Steel Return Bend Fitting 310 is an austenitic warmth insubordinate combination in the organization of a better obstruction than the oxidation under somewhat cyclic conditions through 2000 degree F. Its nickel substance and high chromium offer incredible protection from oxidation, practically identical consumption obstruction, and the upkeep of greater portion of room temperature constrain than the typical austenitic composites. 
Stainless Steel Return Bend Fitting 310 are likewise provided in sliced to length sizes and just as moderately manufactured or machined to get together customer's necessities in funneling framework. At We are on the whole ribs and fittings are liable to firm review at each phase of the creation method, from obtaining of material to the dispatch of item.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 347, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

We present to our customers, a quality scope of Stainless steel return Bend fittings 347, that are a standout amongst the most requested things of our whole range. Generally refreshing for their dimensional accuracy and temperature withstanding ability, these fittings are intended for utilization in designing related enterprises. 
Stainless steel return Bend fittings 347, is a kind of pipe fitting which is used as an affiliation point between two lengths of channels to convey a change toward stream in the pipe, when in doubt at an edge of 180°, 180° or 180°. The short compass Return Bends have an inside to end expel that is 1.5 events the NPS in inches (R=1.5D), while the limited ability to focus proportional to the NPS in inches (R=1.0D). Short compass Return Bends are ordinarily used in tight locales, and short range Return Bends are used when space is open and stream is progressively essential. Starting Pipe and Tubes can similarly make and supply carbon steel Return Bends and solidified steel Return Bends in non-standard size focuses, for instance, 60°, 100°, 120° or 150°. The completions of may be machined for butt welding, hung (commonly female), or socketed, etc. Right when the two completions differentiate in size, the fitting is known as a lessening Return Bend or reducer Return Bend. Early Pipe and Tubes can create Return Bends with Nominal Pipe Sizes running from 1/2" to 48". Divider Thickness of 180° Short Radius Return Bend Not under 87.5% of Nominal Wall Thickness. Timetable running from Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS, etc.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 321, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

We present to our customers, a quality scope of Stainless steel return Bend fittings 321, that are a standout amongst the most requested things of our whole range. Generally refreshing for their dimensional accuracy and temperature withstanding ability, these fittings are intended for utilization in designing related enterprises. 
Stainless steel return Bend fittings 321, is a kind of pipe fitting which is used as an affiliation point between two lengths of channels to convey a change toward stream in the pipe, when in doubt at an edge of 180°, 180° or 180°. The short compass Return Bends have an inside to end expel that is 1.5 events the NPS in inches (R=1.5D), while the limited ability to focus proportional to the NPS in inches (R=1.0D). Short compass Return Bends are ordinarily used in tight locales, and short range Return Bends are used when space is open and stream is progressively essential. Starting Pipe and Tubes can similarly make and supply carbon steel Return Bends and solidified steel Return Bends in non-standard size focuses, for instance, 60°, 100°, 120° or 150°. The completions of may be machined for butt welding, hung (commonly female), or socketed, etc. Right when the two completions differentiate in size, the fitting is known as a lessening Return Bend or reducer Return Bend. Early Pipe and Tubes can create Return Bends with Nominal Pipe Sizes running from 1/2" to 48". Divider Thickness of 180° Short Radius Return Bend Not under 87.5% of Nominal Wall Thickness. Timetable running from Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS, etc.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 304L, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

Specification-

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 304H,that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

Stainless Steel 304H Return Bend Fitting 304H Fittings has a predominant substance of carbon making the combination increasingly suitable for use in capacities where high temperatures are in attendance.Stainless Steel Return Bend Fitting 304H Fittings (UNS S30409)is an alteration of the most broadly utilized "18-8" nickel-chromium austenitic composite. 
Return Bend Fitting 304H which is unaffected by any of the frail bases, for example, ammonium hydroxide, even in high focuses and at high temperatures. Hardened Steel 304H Elbow is commonly exceedingly impervious to assault from acids, yet this quality relies upon the sort and centralization of the corrosive, the encompassing temperature, and the kind of steel. Treated Steel 304H Tee Pipe Fittings is presented to more grounded bases, for example, sodium hydroxide at high fixations and high temperatures will probably encounter some drawing and splitting, particularly with arrangements containing chlorides, for example, sodium hypochlorite. Treated Steel 304H Cross Pipe Fittings are valuable for putting away and taking care of acidic corrosive, particularly in arrangements where it is joined with formic corrosive and when air circulation is absent (oxygen secures hardened steel under such conditions).

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: NAVASHEVA
• Packaging Details: STANDARD EXPORT PACKING

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 316L, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.


Stainless Steel Return Bend Fitting 316L which is being offered in various sizes and shapes to our customers. Notwithstanding having a great reputation for recyclability and end of life recover rates, Stainless Steel Return Bend Fitting 316L additionally meets another vital measure of a manageable material. In the event that the correct hardened steel is chosen to coordinate the consumption states of nature, these Stainless Steel 316 Tee Pipe Fittings can commonly meet the lifetime needs of a task. While different materials may lose viability after some time, our Stainless Steel 316 Cross Pipe Fittings can hold both usefulness and appearance over expanded timeframes. It has been presented to substantial contamination for most its reality, has had negligible cleaning.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: NAVASHEVA
• Packaging Details: STANDARD EXPORT PACKING

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 317L, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

Stainless Steel 317L Return Bends fitting are premium quality twists that are produced utilizing brilliant assets and most recent innovation. The makers, creating these curves mean to deliver high caliber of items that can satisfy a wide range of utilization necessity.

These are molybdenum bearing SS UNS S31700/S31703 Bends that can without much of a stretch hold consumption opposition. Moreover, these sorts of Bends are made utilizing RAM type twisting, while at the same time utilizing the cost-cutting strategy which makes the item more spending plans agreeable.

Additional Information:

• Packaging Details: STANDARD PACKING

Product Details:

We present to our clients, a quality range of stainless steel return bends fittings 904L, that are one of the most demanded items of our entire range. Widely appreciated for their dimensional precision and temperature withstanding capability, these fittings are designed for usage in engineering related industries.

904L Stainless Steel Return Bends are a kind of pipe fitting that alters the course of passing liquid by 180 degrees. It is u-formed and made up of two L-twists. The fitting can be form or given a role according to the necessities of the current pipe. AISI 904L Return Bends are typically used to associate adjoining finishes of two parallel channels. 
Evaluation 904L Stainless Steel tube return twists in 45 degree, 90 degree or 180 degree twists, 180° Return Bends. At the point when indicated BS 904S13 return curves can be provided with patch mugs. The majority of our SAE 904L return curves and cylinder creations are fabricated to the client's details. Our assembling capacities incorporate cylinder twisting/curling, tube shaping, flaring, beading, extending and swedging, machining, brazing and welding. 
We Specialize in Manufacturing Large Diameter and High Thickness ASTM B366 Seamless, Welded Stainless Steel 904L Return Bends. All SS 904L Return Bends are produced in India, with crude materials originating from rumored Mills in India and abroad. We are investor and provider of 904L Stainless Steel Return Bends in a wide range sizes, surface treatment, and ASTM gauges.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: NAVASHEVA
• Packaging Details: STANDARD EXPORT PACKING