Industrial Coils and sheets

Product Details:

Question - What is Stainless Steel Sheets 304/316/304l/316l?

Stainless Steel Sheets 304/316/304l/316l, or plate, is often used in environments that are subject to water and moisture, and where cleanliness and hygiene are important.

One of the most common areas in which Stainless Steel sheet is used is in commercial kitchens for storage cupboards and shelves, to cover worksurfaces and counter tops, and applied to walls as a splashback. Cooker hobs are also made from Stainless Steel Sheet.

Stainless Steel Sheet is also used to make water storage tanks, silos to store grain, and transportation tankers.

Our stocks of Stainless Steel Sheet are available in 304, 316, and 430 grades in a choice of dull polished finish which has a smooth, clean, non-reflective surface, commonly used in commercial kitchens and as splashbacks.

metals 4U also supply bright-polished Stainless Steel Sheet in the form of our unbreakable mirror product which is a bright-polished sheet of Stainless Steel Sheet made from grade 430.

All our Stainless-Steel Sheet metal is supplied with a protective film to the finished side, which can easily be peeled off after installation or fabrication. The reverse side is supplied unfinished.

Stainless Steel Sheet is a T 300 series Stainless Steel austenitic.It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy. Grade 304 is the standard "18/8" stainless that you will probably see in your pans and cookery tools.
We are well known for quality supplier of Stainless Steel Sheet. We always aim to provide high quality Stainless Steel Sheet at most competitive price. We offer different grades in Stainless Steel Sheet. We give full attention to every order and gain highest customer satisfaction by delivery order in time. To place your order visit our feedback form and let us know your requirement and we will get back to you soon.

Applications - Stainless Steel Sheet is used for a wide variety of home and commercial applications, this is one of the most familiar and most frequently used alloys in the stainless steel family.

Typical applications include tanks and containers for a large variety of liquids and solids:

Question - What is Stainless Steel used for?

Stainless Steel Sheet are used in corosion resistan electrical enclosures, auto molding and trim, wheel covers, kitchen equipment, hose clamps, exhaust manifolds, stainless hardware, storage tanks, pressure vessels and piping.

Stainless Steel Sheet is a variation of the basic 18-8 grade, Type 302, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 302 must be annealed in order to retain adequate corrosion resistance. Type Stainless Steel Sheet is an extra low-carbon variation of Type Stainless Steel Sheet with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the ”as-welded“ condition, even in severe corrosive conditions. It often eliminates the necessity of annealing weldments except for applications specifying stress relief. It has slightly lower mechanical properties than Type Stainless Steel Sheet. 

Question -
What is the difference between Stainless Steel Sheet and 316 Stainless Steel?

The simple answer is Stainless Steel Sheet contains 18% chromium and 8% nickel while 316 contains 16% chromium, 10% nickel and 2% molybdenum. The molybdenum is added to help resist corrosion to chlorides (like sea water and de-icing salts.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We are pleased to serve wide range of Stainless steel Perforetd Sheets, along with stainless steel we can make any Ferrous & Non ferrous Metals in Perforation.

We are among the celebrated names in the industry for manufacturing and exporting Perforated Sheet, which is remarkable in durability and made from high quality stainless steel. It is used in filters of combustion engines in automobiles, ventilation of food grain depot and insulation of rooms from sound. The product is resistant towards corrosion and rusting and can be customized for meeting with the requirements of the customers..

 

 

Features:

High tensile strength

Abrasion resistant

Corrosion resistant

Specifications:

Holes Type: We can punch following types of holes Round, Square, Oblong, Rectangular, Capsule, Hexagonal, Dimpled, Lipped

Size: The maximum Sheet size we can perforated is 2000 mm X 6000 mm

Thickness: Maximum Thickness is 10 mm in SS

Material: SS, Aluminum, Galvanized Steel, Brass, Monel, Inconel, Titanium, Hastelloy, Duplex, Super Duplex

Punching Type: Conventional & CNC Type

For Fine Hole Punching: Hole Diameters lies 0.4 mm dia to 2 mm dia

Drilling/punching for Heavy Thickness Sheet: 10 mm to 100 mm

Stainless Steel Perforated Sheets, which is produced under the strict supervision of our group of specialists. Known for their protection from mileage, fine completion, and toughness, these are generally requested in the residential market.

 

 

Stainless Steel Perforated Sheets is utilized ASTM A240 304 Stainless Steel Perforated sheet are sliced to your determinations and provided with complete arrangement of plant test reports. Custom length and width up to 2000 mm can be made accessible. Fares is Our Specialty! what's more, we can source numerous elusive evaluations and additionally non-models sizes to meet the unique prerequisites of our clients. All Stainless Steel Perforated Sheets which is ASTM A240 304 Stainless Steel Perforated sheet can be sliced to measure with the assistance of our broad aptitude in preparing steel plate items.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Packaging Details: STANDARD PACKING

Product Details:

Question - What is Stainless Steel Coils?

Nascent Pipe & Tubes is the leading supplier of stainless steel Circle in the India. When Circle is rolled up into the form required by the client it is known as a 'coil' but this term, widely used within the steel industry to describe a roll of steel is somewhat ambiguous and can be confusing. Here we look in more detail at Stainless Steel Coils and its different forms. These wide Stainless Steel Coils are further processed using a range of manuf­ac­turing techniques such as slitting, where the Stainless Steel coils is slit into a multitude of strands; this is where much of the confusion around the terminology comes in. After slitting, the stainless steel forms a batch of coils taken from the mother coil and Stainless Steel Coils are referred to by many different names, including strip coils, slit Stainless coils, banding or simply strips. The way Stainless Steel Coils are wound can result in different names being applied to them. The most common type is known as a 'pancake coil', named after the way the coil looks when laid flat; 'ribbon wound' is another name for this method of coiling. Another type of winding is 'traverse' or ‘Oscillated’, also known as 'bobbin wound' or 'spool' due to the fact that it looks like a bobbin of cotton sometimes these can be physically wound onto a  plastic spool. Producing Stainless Steel coil in this way allows much larger Stainless Steel coils to be produced, resulting in improved stability and better production yields.

Question - What is Stainless Steel Coil used for?

Stainless Steel coils are used by various industries, as this type of metal is ideal for building panels, walls, roof panels, power stations, ships, and various other projects and construction undertakings. In addition to different sizes of steel coils, there are also two different primary types: Cold-rolled steel coils. Stainless Steel coils are made using the best available raw material. With the increasing demands of Stainless Steel Coils, we produce coils that offer higher stability and superlative formability. Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO (8), SATIN (Met with Plastic Coated) are some of the finishes in which the ASTM A240 Stainless Steel Coils are available in. They are also available with different surfaces. 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sandblast, Brush, etching, etc. are some of the surfaces of Stainless Steel Coils that we provide. To assure the quality of these Stainless Steel Coils we make our products go through some of the quality tests. Positive Material Identification – PMI Testing, Chemical Analysis – Spectra Analysis, Hardness Test, Mechanical Testing Such as Tensile of Area, Intergranular Corrosion (IGC) Test are some of the tests we conduct. Applications of the Stainless Steel Coils are wide and they are commonly used in a lot of industries. Off-Shore Oil Drilling Companies, Pulp and Paper Industry are some of the industries that use Stainless Steel Coils. Pharmaceutical Equipment, Chemical Equipment, Petrochemicals, Sea Water Equipment are some equipment that are made using the Stainless Steel Coils. Heat Exchangers and Condensers are also made using the Stainless Steel coils.

Stainless Steel Coils -

We are the major stainless steel suppliers with the ability to supply Stainless Steel Coil in both large and small quantities. There is no order that is too large or too small. We provide the same level of service and attention to detail to all of your Stainless Steel Coils needs. In addition to exceptional service, you will get only the highest quality Stainless Steel coils.

 

Additional Information:

• Packaging Details: STANDARD

Product Details:

Question - What is Stainless Steel Slit Coils?  (Slitting Coils)

Nascent Pipe and Tubes is one of the leading suppliers, exporters, traders and stock holders of Stainless Steel Slit Coils. (Slitting Coil). Stainless Steel Slit Coils. (Slitting Coils) is a method of cutting metal, where large sheet metal rolls or coils are cut with very sharp rotary blades. They are cut length-wise into the large coil to obtain straight lines, creating narrower strips. Circular blades are used as the coil runs through the slitter to make the cuts.
We are one of the leading suppliers of a wide range of Stainless Steel Slit Coils. (Slitting Coils)These are designed as per international industrial standards and acclaimed for their robustness and high tensile strength. Following the requirements of clients, we offer these products in various standard sizes and technical specifications. These are reasonably priced. Stainless Steel Slit Coils. (Slitting Coils), often referred to as rolled steel slitting, is a process by which wide coils of metal are fed lengthwise through a slitter and cut into narrower coils. As the coils runs through the slitter, extremely sharp circular blades – one upper and one lower – make the cuts. Stainless Steel Slit Coil. (Slitting Coils) are commonly called knives and can be moved to make sheet metal strips of differing widths. There are three main parts to a steel slitting machine, an uncoiler, the slitter and a recoiler. The key to optimizing the quality of the steel slitting process is in the setup. Insuring all elements are exactly aligned, cutter spacing and knife clearance are set correctly, quality tooling and sharp knives are being used and uncoil and recoil tension are all critical.

Stainless Steel Slit Coils?  (Slitting Coils) -

Stainless Steel Slit Coils. (Slitting Coils) is a metal cutting procedure where substantial rolls or curls of sheet metal are cut utilizing extremely sharp turning edges. To accomplish straight lines, they are cut length-wise into the huge loop, making smaller strips. Roundabout edges are in charge of making the slices as the loop goes through the slitter. These are known as "blades" and can be moved to accommodate differing widths. 
Stainless steel can be cut into a wide range of widths. Each application requires its own hardened steel curl cutting capacity. Tempered steel cutting proficiencies imply that all materials sent in to cut are done as such as per the definite capabilities that are essential for that specific employment. A slitting machine has three main parts: an uncoiler, the slitter, and a recoiler. All elements must be perfectly aligned to ensure the success of the material. Factors such as knife clearance and cutter spacing must be calculated and aligned. Stainless Steel Slit Coils (Slitting Coils) is critical that quality tooling and sharp knives are all in place for the job to be done correctly. We have our own inbuilt slitting facility were we provide customers quick service. Stainless Steel slitting coils is used in vast range in today’s market.
Stainless Steel slitting coils provides less wastage for the customers. We have slitting facility above 15mm up to customers required sizes. Stainless steel Slit Coils. (Slitting Coils) can be slit into many different widths. Every application requires its own stainless steel coil slitting capability. Stainless steel Coils. (Slitting Coils) proficiencies mean that all materials sent in to slit are done so according to the exact qualifications that are necessary for that particular job.

Additional Information:

• Packaging Details: STANDARD

Product Details:

We are offering our customers a range of stainless steelShims & foils,
we have a wide range of thickness in stainless steel shims from 0.01mm to 3mm.

we offer a wide range of sizes of these shims and foils as per customers requirement.

Additional Information:

• Packaging Details: Standard

Product Details:

Stainless Steel 316 Shims available in stock. Neha Metal and Alloys offer Stainless Steel 316 Shims in all the sizes. Stainless Steel 316 Shims available in various hardness like Soft, half hard and Hard.Neha Metal and Alloys is well known company in the industry for offering Stainless Steel 316 Shims. Stainless Steel 316 Shims are manufactured with Superior quality. Offered Stainless Steel 316 Shims as per customer required specification. We are giving Stainless Steel 316 Shims to our clients in Cheap rate and best quality. Neha Metal and Alloys offered Stainless Steel 316 Shims after inspected by our Qc Department.

Additional Information:

• Packaging Details: STANDARD

Product Details:

Question - What is Stainless Steel Perforated Sheets

Stainless Steel Perforated sheets can be utilized to advantage in numerous circumstances, e.g noise and weight reduction, air control, filtration or as a decorative finish. The shifted qualities advertised by perforated sheets make them perfect for sorting, screening, facades, ceilings, lights, shelves, shielding, stairs and numerous other applications, far as well numerous to say!

Stainless Steel Perforated sheet | Perforated Sheet | 1.4301 Perforated Sheet | S30400 Perforated Sheet

Stainless Steel Perforated Sheets is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other.

Stainless Steel Perforated Sheets is also known as the perforated sheet, stamping plates, perforated screen, made through the metal stamping and sheet metal manufacturing.Sheet metal materials include stainless steel Perforated Sheets.

Leveraging on our numerous of customers all over the world, Nascent Pipe & Tubes emerged as one of the reliable and trusted manufacturers and importers of Stainless Steel Perforated Sheets. Quality has always been our forte, which have enabled us to manufacture wide range of precision quality sheets for our clients. Our clients can avail these Stainless Steel Perforated Sheets Perforated Sheets from us in various specifications such as size, lengths and other requirements. We are offering this sheet at very reasonable price.

Leading Manufacturer and Exporter from Mumbai, our product range includes Industrial Sheets such as Stainless Steel Perforated Sheets, Perforated Sheet and M.S Perforation Sheet.
We are among the celebrated names in the industry for manufacturing and exporting Stainless Steel Perforated Sheets, which is remarkable in durability and made from high quality Stainless steel Perforated Sheets. It is used in filters of combustion engines in automobiles, ventilation of food grain depot and insulation of rooms from sound. The product is resistant towards corrosion and rusting and can be customized for meeting with the requirements of the customers..

 

 

Features:

High tensile strength

Abrasion resistant

Corrosion resistant

Stainless Steel Perforated Sheets Specifications:

Holes Type: We can punch following types of holes Round, Square, Oblong, Rectangular, Capsule, Hexagonal, Dimpled, Lipped

Size: The maximum Sheet size we can perforated is 2000 mm X 6000 mm

Thickness: Maximum Thickness is 10 mm in SS

Material: SS, Aluminum, Galvanized Steel, Brass, Monel, Inconel, Titanium, Hastelloy, Duplex, Super Duplex

Punching Type: Conventional & CNC Type

For Fine Hole Punching: Hole Diameters lies 0.4 mm dia to 2 mm dia

Drilling/punching for Heavy Thickness Sheet: 10 mm to 100 mm

Stainless Steel Perforated Sheets, which is produced under the strict supervision of our group of specialists. Known for their protection from mileage, fine completion, and toughness, these are generally requested in the residential market. 

 

 

Stainless Steel Perforated Sheets is utilized ASTM A240 304 Stainless Steel Perforated sheet are sliced to your determinations and provided with complete arrangement of plant test reports. Custom length and width up to 2000 mm can be made accessible. Fares is Our Specialty! what's more, we can source numerous elusive evaluations and additionally non-models sizes to meet the unique prerequisites of our clients. All Stainless Steel Perforated Sheets which is ASTM A240 304 Stainless Steel Perforated sheet can be sliced to measure with the assistance of our broad aptitude in preparing steel plate items.

Additional Information:

• Packaging Details: STANDARD PACKING

Product Details:

We have been supplying Phosphor Bronze Sheet, which find wide applications in varied industries like chemical and mechanical engineering. Accordance with the defined industry standards, these sheets suit the diverse requirements of our clients. These sheets are appreciated by our customers.

Specifications:

• PB Sheet are available in 48” x 14” as per as requirement
• Sizes from: 0.1 to 6 mm

Features:

• Durable finish standards
• Ductility
• Corrosion resistance
• Flexible in nature

Additional Information:

• Packaging Details: STANDARD