Nascent Pipe & Tubes
Nascent Pipe & Tubes
Girgaon, Mumbai, Maharashtra
GST No. 27AAOFN6213E1ZA
TrustSEAL Verified
Call 0804897060992% Response Rate
SEND EMAIL
 

Stainless Steel Pipe

Stainless steel Pipeare notable for theircorrosion resistance, which increases with increasing chromium content. Additions of molybdenum increase corrosion resistance in reducing acids and against pitting attack in chloride solutions. Thus, there are numerous grades of stainless steel with varying chromium and molybdenum contents to suit the environment the alloy must endure.Stainless steel’s resistance to corrosion and staining, low maintenance, and familiar lustre make it an ideal material for many applications where both the strength of steel and corrosion resistance are required.

Following are the various types of finishes available on STAINLESS STEEL PIPE

  • No. 2D: Cold rolled, annealed, pickled and passivated
  • No. 2B: Same as above with additional pass through highly polished rollers
  • No. 2BA: Bright annealed (BA or 2R) same as above then bright annealed under oxygen-free atmospheric condition
  • No. 4: Brushed finish
  • No. 5: Satin finish
  • No. 6: Matte finish (brushed but smoother than #4)
  • No. 7: Reflective finish
  • No. 8: Mirror finish

Nascent Group manufactures these pipes as per International Standards ,
Stainless Steel pipes ASTM A 269
Stainless Steel pipes ASTM A 249
Stainless Steel pipes ASTM A 312
Stainless Steel pipes ASTM A 554
Stainless Steel pipes ASTM A 270.

Stainless Steel 304 Polish Pipes

Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
  • Stainless Steel 304 Polish Pipes
Get Best Quote
Approx. Price: Rs 283 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity500 Kg
Unit Pipe Length3 meter, Customized, 6 meter
Size3/4 inch, 3 inch, 1/2 inch, 2 inch, 1 inch
FeaturesPolished, Cold Drawn
Material GradeSS304
Pipe FluidSteam, OIL, Chemical, Water
TypeWelded, Seamless
ShapeRound
BrandNascent
ColorSILVER
ConditionNew
Is It Corrosion ResistantCorrosion Resistant

Question - What is Stainless Steel 304 polish Pipe?

Nascent Pipe and Tubes is one of the leading manufacturers, suppliers, exporters, traders and stock holders of Stainless Steel 304 Polish Pipe. It is a non-magnetic alloy in the annealed condition but becomes magnetic as it is cold worked. Alloy Stainless Steel 304 Polish Pipes can be easily welded and is the choice for many deep drawn, spun or formed parts due to its high ductility. Electro polished Stainless Steel 304 Polish Pipes, SS UNS S30400 Electro polished Tube Exporter in India, Stainless Steel 304 polish pipes EP Pipes, DIN 1.4301 EP Tubes, Stainless Steel 304 Polish Pipes Electro Polish Seamless Pipe, Stainless Steel 304 Polish Pipes Electro polished Welded Tube Distributors, SUS 304 EP Seamless Tube, AISI 304 Steel EP Welded Pipe Manufacturer, Stainless Steel 304 Polish pipes Electro polished Tubing Supplier in Mumbai, India. ASTM A312 Stainless Steel 304 Polish Pipes Electro polished Pipe, ASTM A249/ A269 / A270 Stainless Steel 304 Polish Pipes Electro polished Tube, Electro polished SS 304 Tube Dealers, SS 1.4301 Electro polished Pipe, Stainless Steel S30400 EP Tubing, Stainless Steel 304 EP Pipe, SS 304 Electro polished Seamless Tube Traders in Mumbai, Stainless Steel AISI 304 Electro Polish Welded Pipe Stockists in India, Stainless Steel 304 Polish pipes EP Seamless Pipe, Stainless Steel 304 Polish Pipes SS EP Welded Tube Manufacturers in India, Stainless Steel 304 Polish Pipes Electro polished Piping Stockholders. Nascent Pipes & Tubes is a main manufacturers and exporters of Stainless Steel 304 Polish Pipe electro polished pipes and cylinders. Tempered steel is known to join its mechanical properties with a demonstrated consumption opposition. Be that as it may, despites of its known obstruction Stainless Steel can at times bomb in averting erosion. Electroplating is normal process on Stainless Steel as it upgrades its officially great erosion obstruction. All Steel types are essentially combinations of iron with at least half iron and 10.5% chromium. The chromium content is the thing that gives the opposition properties.

Stainless Steel 304 Polish Pipe -

This layer of oxygen is known to counteract further dispersion of oxygen and along these lines decreasing the danger of erosion much more. Electroplating thickens the oxide layer, along these lines making Stainless Steel 304 Polish Pipe electro polished pipes and cylinders increasingly impervious to erosion. Electro polishing permits ASTM B912 to be usable even under cruel situations. We center around conveying great items that are ensured to offer most extreme utility and unwavering quality to the client.

Stainless Steel 304 Electro Polish Pipe & Tube Specification

Specifications

ASTM A312, A249, A269, A270

Size

1/8" NB to 24" NB, 1/4" OD to 24" OD sizes

Thickness Range

1mm to 20mm, SCH 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S as per ANSI B36.19/36.10

Form

Round, Square, Rectangular

Length

Up to 6 meters, custom cut lengths

Finish

Electropolished finish inside and outside

 

Request
Callback


Additional Information:

  • Item Code: POLISHPIPES
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVASHEVA
  • Production Capacity: 500 TONS
  • Delivery Time: DEPENDS
  • Packaging Details: STANDARD EXPORT PACKING
Yes! I am Interested

Stainless Steel 316 Pipes

Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
  • Stainless Steel 316 Pipes
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Product Brochure

Product Details:

Unit Pipe Length3 meter, Customized, 6 meter
Size1/2 inch, 3/4 inch, 1 inch, 3 inch, 2 inch
Unit Length3m, 6m, AS PER CUSTOMER''S REQUIREMENT
Steel Grade201,304,304L,316,316L
Unit Length (meters)AS PER CUSTOMER''S REQUIREMENT, 3, 6
Surface FinishMill Finished, Finished Polished
FeaturesCold Drawn, Polished, Pickled, Anealed
Pipe FluidChemical, Water
TypeWelded
Diameter (Inch)1/2" TO 24"
ConditionNew
Wall Thickness (mm)01 TO 12MM
Section ShapeCircular, Square, Rectangular,Oval
StandardASTM/ASME/IS/BIS/JIS
Finishing2B, HR-No.1, Satin, Mirror Polish
Is It Corrosion ResistantCorrosion Resistant
BrandNascent
ShapeRound
Is It CustomizedCustomised
Material GradeSS304, SS316L, SS316
MaterialStainless Steel

Question - What is Stainless Steel 316 Pipes?

Nascent Pipe and Tubes is one of the leading manufacturers, suppliers, exporters and stock holders of Stainless Steel 316 Pipes. Stainless Steel 316 Pipes grade is an austenitic grade that provides great stability and firmness to an alloy. These Stainless Steel 316 Pipes are enriched with great resistance and robustness. It provides excellent resistance from chloride ions. The thickness of these pipes varies from 0.5mm to 6.35mm. These pipes have extremely heavy formations. These pipes are commonly used for hot applications. These pipes are used for transferring liquids, gases, fluids, and acids. Stainless steel 316 pipes are made with a ductile combination which also includes 4% molybdenum. These pipes are enriched with excellent properties that include various features. These pipes are highly durable and it also has great yield and tensile strength. Nascent Pipe and Tubes sure that they use high-quality products in the manufacturing of these extraordinary pipes. We also use multiple testing methods to ensure the capacity, quality, and strength of the product. We ship these products all around the globe at extremely nominal rates. The estimated working temperature for these stainless steel pipes is 1010°C-1120°C. These pipes are commonly being used in various industries for transferring liquids and other chemicals.

Stainless Steel 316 Pipes - 

The Stainless Steel 316 Pipes and tubes are good for working in all-purpose erosion conditions. They are even good for pitting and crevice corrosion conditions due to their resistant characteristics. The Stainless Steel 316 Pipes alloy are also an austenite alloy and contains molybdenum. In addition to molybdenum, nickel is also added to the alloy making pipes and tubes good for architectural purposes. Henceforth, they are useful in adulterated marine atmospheres. Even at sub-zero temperatures, the Stainless Steel 316 Pipes & tubes can be used. The pipes and tubes of this grade possess excellent weld-ability. Moreover, this property is maintained even if filler metal is not used while welding. Therefore, they are useful in commercial usage as well. Some of the widely used industries of pipes and tubes are marine, power generation, petrochemical, and architectural industries.
The Stainless Steel 316 Pipes alloy contains nickel and chromium content that infuses ductile potency, greater creep rupture strength, and more to these products. To provide protection against erosion while soldering, the carbon is added in a lower quantity. This inferior carbon content makes the pipes and tubes resistant against sensitization. Therefore, they can be useful infused parts of the weighty gauge. Moreover, the excellent toughness is obtained due to the austenitic structure of the alloy. Even at the cryogenic temperature the pipes and tubes show excellent toughness. So you are seeking for buying the Stainless Steel 316 Pipes. Yes, you can buy it from Nascent Pipe and Tubes. This is one of the most popular industries that are leading on the top as a producer, supplier, stockiest of the stunning quality of pipes in wide comprehensive ranges. The company is fully focused on its customer and is working accordingly to satisfy all their wants. They are manufacturing the item as per the guidelines formulated and various product quality standards. Additionally, they are making use of the latest technology, tools in bringing out the desirable quality of the item. This is easily satisfying all application wants.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVASHEVA
  • Packaging Details: STANDARD PACKING
Yes! I am Interested

Stainless Steel 409L Pipes

Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
  • Stainless Steel 409L Pipes
Get Best Quote
Approx. Price: Rs 135 / KgGet Latest Price
Product Brochure

Product Details:

Size (inch)>3, 1, 2, 3, 1/2, 3/4
Unit Pipe LengthCustomized, 3 meter, 6 meter
Unit Length (meters)6, 3, Customised
FeaturesPolished, Cold Drawn
Surface FinishMill Finished
Size1/2 inch, 1 inch, 3/4 inch, 3 inch, 2 inch
Pipe FluidGas, Chemical, Steam
Thickness(mm)1MM TO 3MM
TypeSeamless, Welded
ConditionNew
Packaging TypeStandard Packing
ApplicationAutomobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry
Is It Corrosion ResistantCorrosion Resistant
BrandNascent
Material Gradess409L

Question - What is Stainless Steel 409L Pipes?

Nascent Pipe and Tubes is one of the Leading manufacturer, supplier and stock holder of Stainless Steel 409l Pipes.
Grade 409L (UNS S40900, EN 1.4512) is a kind of stabile version of 409, composed with proper chromium, low composition of carbon and nitrogen and adjunction of titanium, all composition appropriate make Stainless Steel 409L Pipes have some properties, like corrosion resistance, weldability and formability. Due to the lower chromium, Stainless Steel 409L Pipes was another low cost option for corrosion resistant stainless steel. It has a good combination of heat resistance and corrosion resistance, can be ideal for non- or lightly corrosive environments or applications. It has excellent oxidation resistance in high temperatures and good welding performance, which can be used for automotive exhaust pipes or oil equipment. (Grade 409L) Stainless Steel 409L pipes are titanium stabilized ferritic stainless steel containing about 11% chromium conforming to UNS S40910. The presence of chromium leads to the formation of a passive surface film which provides corrosion resistance. The addition of titanium prevents formation of harmful chromium carbides which can lead to inter granular corrosion in service. Titanium being a ferrite former also helps in avoiding hardening on cooling after welding. Furthermore, titanium also ties up with sulphur, leading to improved resistance to pitting corrosion. Atmospheric corrosion resistance of this grade is nearly 250 times that of mild steel. This grade is well suited for such mildly corrosive environments where good formability and weldability are required. Stainless Steel 409L Pipes has a good combination of heat resistance and corrosion resistance, can be ideal for non- or lightly corrosive environments or applications. It has excellent oxidation resistance in high temperatures and good welding performance, which can be used for automotive exhaust pipes or oil equipment.

Stainless Steel 409L Pipes - 

Professional supply of Stainless Steel 409L Pipes, Stainless Steel Pipe 409L is usually used for exhaust pipes, exhaust systems - both as stainless steel exhaust pipes. The specification is complete, the price is excellent, can customize the non-standard fittings. Stainless Steel 409L Pipes are the typical representative of 400 series stainless steel, which is low carbon and titanium, and contains about 11% Cr, generally used as heat resistant steel. The steel has excellent processability and weldability. It has proper high temperature characteristics and normal temperature and corrosion resistance.
Stainless Steel 409L Pipes main purpose The 409L features make it widely used in automobile exhaust pipe parts, heat exchangers, heat-resistant equipment, and can also be used in low-grade western tableware, electronic components. The 409L after the hardened treatment can also be used as a container.

Properties of Stainless Steel 409L
Pipes -

Grade 409L may be considered for a wide variety of applications where one or more of the following properties are important

  • Corrosion resistance
  • Resistance to oxidation
  • Excellent resistance to high temperature, exhaust gas and atmospheric corrosion
  • Heat Treatment
  • Suitable for welding
  • Good flexibility and excellent formability
  • Low costs
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NAVASHEVA
  • Production Capacity: 100 TONS
  • Delivery Time: DEPEND ON QUANTITY
  • Packaging Details: STANDARD PACKING
Yes! I am Interested

Stainless Steel 304 Pipe

Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
  • Stainless Steel 304 Pipe
Get Best Quote
Approx. Price: Rs 285 / KgGet Latest Price
Product Brochure

Product Details:

Size (inch)2, >3, 3, 1, 1/2, 3/4
Unit Length (meters)18, 3, 6, 12
Unit Pipe Length3 meter, Customized, As per customer's requirement, 6 meter
Surface FinishBrushed, Sand Blasted, Mill Finished, Finished Polished
Pipe FluidGas, Slurry, Water, Steam, Chemical
Thickness(mm)1mm to 5mm
TypeWelded, Seamless
Diameter (mm)1/2" TO 24"
ConditionNew
ShapeCircular, Square, Rectangular, Oval
Corrosion ResistantYes
Thickness (mm)01 TO 12MM
Surface Finishing2B, Satin, Mirror Finish, Hairline Finish
MaterialStainless Steel
Size1 inch, 3 inch, 2 inch, 3/4 inch, 1/2 inch
Is It Corrosion ResistantCorrosion Resistant
BrandNascent
Material GradeSS304

Question - What is Stainless Steel 304 Pipe?

Nascent Pipe and Tubes is one of the leading manufacturers, suppliers, exporters, traders and stock holders of Stainless Steel 304 Pipe. Stainless Steel 304 Pipe provides and is easy to sanitize, making it ideal for a wide range of applications within numerous industries. Since it is less expensive and easier to fabricate, Stainless Steel 304 Pipe is the most widely used austenitic stainless steel pipe product in the world. Stainless Steel 304 pipe are long, hollow tubes that are used for a wide range of industrial applications. They are produced by two distinct methods which result in either a welded or seamless pipe. Alloy Stainless Steel 304 pipe provides enhanced strength and corrosion resistance and can be used for all types of fabrication processes, especially those that are subjected to outdoor environmental conditions. Stainless steel 304 Pipe and 316 alloy grade pipe products are synonymous with corrosion resistance. Both grades are known for possessing some of the best corrosion resistant properties within the world of metal. Additionally, each SS pipe alloy grade maintains its own unique properties, providing variations that allow 316 and Stainless steel 304 Pipe to be used for both similar and differentiating industrial applications.

Question - What is advantages of Stainless Steel 304 Pipe?

Stainless Steel 304 Pipe provides enhanced corrosion resistance and is easy to sanitize, making it ideal for a wide range of applications within numerous industries. Since it is less expensive and easier to fabricate, Stainless Steel 304 pipe is the most widely used austenitic stainless steel pipe product in the world. Benefits of Stainless Steel 304 Pipe include.

  • Excellent corrosion resistance
  • Resists organic chemicals
  • Impact resistant
  • Enhanced aesthetic value
  • Easily recyclable

Stainless Steel 304 Pipe Applications - 

Stainless Steel 304 Pipe maintains numerous applications, some of the most prevalent include. A typical application of the Stainless steel 304 pipe would be its use in heat exchanger. A heat exchanger is a system that causes transference of heat between two or more fluids, Since the Stainless Steel 304 Pipe welded pipe is an economically viable option, they are more often used in heat exchangers. While heat exchangers require moderate resistance to corrosion and good tensile strength as primary properties, the very versatile Stainless Steel 304 Pipe EFW pipe is able to cater to their needs without causing a dent in the buyer’s pocket. Moreover, the Stainless Steel 304 Pipe performs the functions rather effectively. Therefore, the ASTM A312 TP Stainless Steel 304 seamless pipe is a popular choice across various industrial sectors such as power stations, chemical plants, refrigeration, air conditioning, petrochemical plants as well as petroleum refineries. The ASTM A312 specified AISI Stainless Steel 304 pipe has been designed keeping in mind their use for applications that not only involve high temperature conditions but also for general corrosive applications. Most trusted Stainless Steel 304 Pipe Suppliers.

  • Automobile Manufacturing
  • Refrigeration Units
  • Heating & Plumbing Systems
  • Handrails
  • Supports
  • Bicycle Frames  
  • We, NASCENT Pipe & Tube, are the leading manufacturer of Stainless Steel Pipes.
  • We produce these pipes for both decorative & Industrial purpose,
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVASHEVA
  • Production Capacity: 500 TONS PER MONTH
  • Delivery Time: 2-3 WEEKS
  • Packaging Details: STANDARD PACKING
Yes! I am Interested

Stainless Steel Square Pipe 317L

Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
  • Stainless Steel Square Pipe 317L
Get Best Quote
Approx. Price: Rs 250 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 Kg
Size3 inch
Unit Length6 m, Customized
Unit Pipe Length6 meter, 3 meter, Customized
Surface FinishBrushed, Finished Polished, Mill Finished
Materialstainless steel 317L
ShapeSquare Pipe
TechniqueCold Rolled, Hot Rolled, ERW
BrandNascent
Packaging TypeStandard
ENDPlain End, Beveled End, Treaded
FeaturesHigh Strength, Resistant to high mechanical stresses, Resistant to high pressure

Question - What is Stainless Steel Square Pipe 317L?

Nascent Pipe and Tubes is one of the leading manufacturers, suppliers, exporters, traders and stock holders of Stainless Steel Pipe 317L. This is popular in chemical industries and steam plants. Our diverse product range reflects an ever changing and demanding market place emphasising our commitment to satisfying all aspects of our customers' requirements. Our manufactured Stainless Steel Square Pipe 317L have high demand in the fabrication process because of its durability and effectiveness. These Stainless Steel Pipes 317L are providing other excellent characteristics and features to satisfy the needs and demands of our buyers. Our Pipes has many benefits such as Corrosion resistance and high-temperature resistance, has excellently machine able, and suitable for many applications in different industrial sectors. We are never compromising with the quality standard of the Stainless Steel Square Pipes 317L. We are using modern machinery and tools in our well-equipped manufacturing unit. This helps to fabricate Pipes in bulk amount without compromising in quality. We are also checking our manufactured Stainless Steel Square Pipe 317L by performing various tests to identify the effectiveness, features, strength, and many more. We are manufacturing these Stainless Steel Square Pipes in plenty of amounts and providing the best quality if Square Pipes and Tubes. Our Stainless Steel Square Pipes 316L are available in various shapes, sizes, dimensions, and also as per the given requirements of clients.

Stainless Steel Square Pipe 317L -

Stainless Steel Square Pipe 317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. Stainless Steel Square Pipe 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding. Stainless Steel 317L Square Pipes are iron compounds with at least 10.5 % chromium. Other alloying components are included Stainless Steel 317L Square Pipes to improve their structure and properties, for example, formability, quality and cryogenic sturdiness. Hardened Steel 317L Rectangular Pipes are most ordinarily utilized for their consumption opposition. The second most regular reason Stainless Steel 317L Electropolish Pipes are utilized is for their high temperature properties.

STAINLESS STEEL SQUARE PIPE 317L CORROSION PROPERTIES:

Stainless Steel Square Pipe 317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. Stainless Steel Square Pipe 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, Stainless Steel Square Pipe 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVA SHEVA
  • Production Capacity: 100 TONS
Yes! I am Interested

Stainless Steel ERW Pipe

Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
  • Stainless Steel ERW Pipe
Get Best Quote
Approx. Price: Rs 185 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity10 Kg
Unit Pipe Length6 meter, 3 meter, AS PER CUSTOMER'S REQUIREMENT, Customized
Size1 inch, 3 inch, 1/2 inch, 2 inch, 3/4 inch
Unit Length (meters)3, 6, AS PER CUSTOMER'S REQUIREMENT
Surface FinishMill Finished, Finished Polished
FeaturesCold Drawn, Polished
TypeSeamless, Welded
ConditionNew
Is It Corrosion ResistantCorrosion Resistant
BrandNASCENT
ShapeRound
Material GradeSS304, SS316, 202, 347, SS316L

Question - What is Stainless Steel ERW Pipe?

Nascent Pipe & Tubes is one of the Leading manufacturers, Supplier, exporter and stock holder of Stainless Steel ERW Pipe. Stainless Steel ERW Pipe is made up of different stainless steel material and is produced through a procedure known as the electric resistance weld. Stainless Steel ERW Pipe is a pipe that is made up of stainless steel and is produced by welding procedure. There are different types of stainless steel such as austenitic, ferritic, martensitic and duplex. Stainless Steel ERW Pipe have different crystalline structures and different mechanical properties. The welded pipes can be produced by different procedures. The Stainless Steel ERW Pipe is made up of a process called electric resistance weld. The process is performed by applying electricity to the stainless steel strip or plate to melt it at the joining points and then weld them together to form the pipe. Biggest Stainless Steel ERW Pipe Manufacturers in India.
This corrosion is generally a problem in a high carbon Stainless Steel Erw Pipe, because at high temperatures, the weld seam may get sensitized and form carbide precipitates. Generally, a Stainless Steel Welded Pipe that is used at high temperature gives off steam and is under high pressure during the transportation of various fluid or gas media. And so it is important that the buyer select the appropriate Stainless Steel ERW Pipe Pressure Rating, something that matches the pressure of the application. Aside from the pressure rating, another important aspect of piping is its size. Keeping in mind that the environment also influences the application, the use of a correct Stainless Steel Welded Pipe Size is a must.

Question - What is difference between Seamless and Stainless Steel ERW Pipe? 

Stainless Steel ERW Pipe (ERW) Electric Resistance Welding pipe is manufactured by rolling metal and then welding it longitudinally across its length. Seamless pipe is manufactured by extruding the metal to the desired length; therefore ERW pipe have a welded joint in its cross-section, while seamless pipe does not have any joint in its cross-section through-out its length. In Seamless pipe, there are no welding or joints and is manufactured from solid round billets. The seamless pipe is finished to dimensional and wall thickness specifications in sizes from 1/8 inch to 26 inch OD. Applicable in for High-pressure applications such as Hydrocarbon Industries & Refineries, Oil & Gas Exploration & Drilling, Oil & Gas Transportation and Air and Hydraulic cylinders, Bearings, Boilers, Automobiles
etc. Stainless Steel ERW Pipe (ERW) Electric Resistance Welding Pipes and tubes are widely used in diverse industries including engineering, fencing, line pipes, scaffolding, etc. Some of the common applications of ERW pipes can be found in agriculture and irrigation sector, especially in sewerage systems, water mains, and industrial water lines, deep tube wells, plant piping, etc. They are also widely used in gas pipe lines specially in manufacturing pipe lines for natural gas, LPG and other non-toxic gas.

Stainless Steel ERW Pipe -

Stainless Steel ERW Pipe means electric resistance welded pipes. Electric resistance welding (ERW) pipe is manufactured by rolling metal and then welding it longitudinally across its length Stainless Steel ERW Pipe and tubes are available in various qualities, wall thickness and diameter of the finished Pipes. Stainless Steel ERW pipes are commonly used for general applications as well as applications in the oil and gas.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVA SHEVA
  • Production Capacity: 300 TONS [MONTHLY]
  • Delivery Time: DEPENDS ON SIZE AND QUANTITY
  • Packaging Details: STANDARD EXPORT PACKING
Yes! I am Interested

Stainless Steel Polish Pipes

Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
  • Stainless Steel Polish Pipes
Get Best Quote
Approx. Price: Rs 175 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity500 Kg
Size1 inch, 1/2 inch, 3 inch, 2 inch, 3/4 inch
Unit Length (meters)3, AS PER CUSTOMER'S REQUIREMENT, 6
FeaturesPolished
ConditionNew
TypeWelded, Seamless
BrandNASCENT
Pipe FluidGas, Water, Chemical, OIL
Is It Corrosion ResistantCorrosion Resistant
Is It CustomizedCustomised
Material GradeSS204, 201, 202, SS316L, SS316, SS304

Question - What is Stainless Steel polish Pipe?

Nascent Pipe & Tubes is one of the leading manufacturers, supplier, exporter, traders and stock holder of Stainless Steel Polish Pipes. Our polishing experts pay high attention to every minute detail and deliver the exactly anticipated Stainless Steel Polish Pipe. We are the leading Stainless Steel Polish Pipe manufacturer in India offering countless fabrication competences via cutting, polishing, and then forming the precise stainless steel pipe products as per your terms. However, you can also provide us with your own pipe or we will offer you the material at a reasonable cost. Whatever is your wish and demands, we will fulfill it.
Our expert team of engineers would always serve you with unique and precise Stainless Steel Polish Pipe products. We the leading Stainless Steel Polish Pipes manufacturer have been into delivering incredibly polished pipes to a wide client base since our inception in 2005. Our polishing experts hold notable experience in custom jobs and they hold quality knowledge on offering the best customer service for stainless steel suppliers and fabrication firms as well.

Stainless steel Polish Pipes -

Nascent Pipe and Tubes is involved in offering a vast array of Stainless Steel Polish Pipes suppliers, exporter, stockiest and manufacturer to our domestic and global clients. Polished steel pipes as well as promote easy cleaning and reduce associated downtime. According to the different applications, the Stainless Steel Electropolished Pipe have different diameters. We are also dealers of Stainless Steel Polish Pipe, which are actually manufactured from High-Quality of Standard Raw Materials and are designed as per national and international standards.
The  Stainless Steel Polish Pipes promotes easy cleaning and reduce associated down time. In construction industries, these  Stainless Steel Polish Pipes are used most widely. Also we provide polishing 316 stainless steel pipe to clients. We are also Exporters of Stainless Steel Polished Pipe, which are actually manufactured from High-Quality of Standard Raw Materials and are designed as per with national and international standards. 

Stainless Steel Polish Pipes Pipes SPECIFICATION -
  •  Stainless Steel Polished Pipe Size : 1/8" NB to 24" NB, 1/4" OD to 24" OD
  •  SS Grades : TP - 304,304L,316,316L,201
  •  SS Standards : ASTM A554, A312, A778, JIS G3446, CNS G3119, GB
  •  SS Type : As Welded, EFW, ERW, Seamless, Semi Seamless, Bead Removed
  •  SS Length : Up to 6 meters, custom cut lengths
  •  Stainless Steel Polished Pipe Thickness : 1mm to 20mm, SCH 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S as per ANSI B36.19/36.10
  •  SS Surface Finish : Polished Grit 120 - 600, INSIDE ELECTROPOLISHED , OUTSIDE MIRROR FINISH bright etc

We also manufacture Stainless Steel Polish Pipes in matt finish, satin finish.

Stainless Steel Polish Pipes in 201 grade.
Stainless Steel Polish Pipes in 202 grade.
Stainless Steel Polish Pipes in 304 grade.
Stainless Steel Polish Pipes in 316 grade.
Stainless Steel Polish Pipes in 310 grade.
Stainless Steel Polish Pipes in 409 grade.
Stainless Steel Polish Pipes in 410 grade.
Stainless Steel Polish Pipes in 420 grade.
Request
Callback


Additional Information:

  • Item Code: NPT
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Port of Dispatch: NHAVA SHEVA
  • Production Capacity: 250 MTMONTH
  • Delivery Time: READY
  • Packaging Details: EACH PIPE PACKED IN SINGLE POLYTHENE COVERS AND THEN 50-60 KGS BUNDLED IN BARDAN
Yes! I am Interested

Stainless Steel ERW Pipe 304

Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
  • Stainless Steel ERW Pipe 304
Get Best Quote
Approx. Price: Rs 250 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity40 Kg
Unit Pipe LengthCustomized, 6 meter, 3 meter
Size1/2 inch, 1 inch, 2 inch, 3 inch, 3/4 inch
Unit Length6m, AS PER CUSTOMER''S REQUIREMENT, 3m
Unit Length (meters)3, 6, AS PER CUSTOMER''S REQUIREMENT
FeaturesPickled, Anealed, Polished, Cold Drawn
TypeWelded
ConditionNew
Is It Corrosion ResistantCorrosion Resistant
Is It CustomizedCustomised
Material GradeSS316L, SS316, SS304

Question - What is Stainless steel ERW Pipe 304 used for

Nascent Pipe and Tubes is one of the leading manufacturers, suppliers, exporters, traders and stock holders of Stainless Steel ERW Pipe 304. Our product range includes the most used Stainless Steel ERW Pipe 304 ERW Pipe products as well as the second most used SS 316 ERW Pipe products. The ERW pipes are electric resistant welded from either strips or coils in a longitudinal direction to add strength to the pipe. There are different dimensions and standards of these pipes. The ERW Schedule 40 Pipe is one of the medium range schedules that allow medium range pressure containment of the pipes. The schedules govern the wall thickness for different outer diameter sizes of the pipes. We supply Stainless Steel ERW Pipe 304 Electric Resistance Welding Pipes in various diameters and lengths for meeting the requirement of diverse industrial segments. The durability and strength of our Stainless Steel ERW Pipe 304 ERW Pipes makes them foremost choice of customers based across the globe. We offer a huge array of ASTM A249 JIS SUS Stainless Steel ERW Pipe 304 ERW Pipes that are fabricated by using various grades of material steel and metal alloys. They are single welded or double welded. SS ERW pipes are fabricated in different alloys. We offer pipes with radiography or without radiography. Our comprehensive range includes UNS S30400 ERW Square Pipes, ERW alloy steel pipes, welded steel pipes and many more. We produce using world-class quality of steel and alloy to retain their durability for a longer period. Depending on the customer’s requirements we can manufacture Stainless steel ERW Pipe 304 of different shape and size. We have a very large production capacity of ASTM A312 TP Stainless Steel ERW Pipe 304 SS ERW Pipes and are used in various engineering purposes, scaffolding, fencing, line pipes, etc. These pipes are available in lengths from single random to 120 feet depending on mill capability. They are available with square ends or beveled for threaded, welding and coupled and Victaulic grooved. The surface finishes are available in black or bare, or with protective coatings.

Stainless Steel ERW Pipe 304 -

Depending on the customer’s requirements we can manufacture Stainless Steel ERW pipes 304 and tubes of different shape and size. We have a very large production capacity of ASTM A312 TP Stainless Steel ERW Pipe 304 and are used in various engineering purposes, scaffolding, fencing, line pipes, etc. These pipes are available in lengths from single random to 120 feet depending on mill capability. They are available with square ends or beveled for threaded, welding and coupled and Victaulic grooved. The surface finishes are available in black or bare, or with protective coatings. We offer a huge array of ASTM A249 Stainless Steel ERW Pipe 304 that are fabricated by using various grades of material steel and metal alloys. They are single welded or double welded. SS ERW pipes are fabricated in different alloys. We offer pipes with radiography or without radiography. Our comprehensive range includes UNS S30400 ERW Square Pipes, ERW alloy steel pipes, welded steel pipes and many more. We produce using world-class quality of steel and alloy to retain their durability for a longer period. The most widely used of the heat resisting, Stainless Steel ERW Pipe 304 Welded Pipes offers highest decomposition discrepancy to a great deal of chemical corrodents and industrial environment. In the meantime, our Stainless Steel ERW Pipe 304 has an amazingly enhanced formability and can be welded in the course of superior grace by all standard means. We offer Stainless Steel ERW Pipe 304 in different sizes, thickness and standards as per made to order needs given by our customers. We are the leading Suppliers of Stainless Steel ERW Pipe 304.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
Yes! I am Interested

Stainless Steel Perforated Pipes

Stainless Steel Perforated Pipes
  • Stainless Steel Perforated Pipes
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity10 Kilogram
Unit Pipe Length6 meter, 3 meter, Customized
Size3 inch
ApplicationStructure Pipe
Material GradeSS316, SS204, SS316L, SS304
BrandNascent
TypeWelded
ColorSILVER
Unit Length (meters)3,6,AS PER CUSTOMER''S REQUIREMENT
ConditionRefurbished
Is It Corrosion ResistantCorrosion Resistant
Is It CustomizedCustomised

Question - What is Stainless Steel Perforated Pipe?

Nascent Pipe and Tubes is one of the leading manufacturer, supplier, exporter and stock holder of Stainless Steel Perforated Pipes. With different sizes according to the requirement in the desired length. Stainless Steel Perforated Pipes is mainly applied to a variety of filtration industry such as, mining, petroleum, chemical, food, medicine, petroleum, water treatment and so on. Perforated pipe is made of steel punching mesh with galvanized layer, stainless steel punching mesh, copper punching mesh, in which the most punching steel mesh applied is stainless steel punching mesh. Fabrication methods are welded or lock seam. Welding types include straight line and spiral welded. Perforated pipe can be customized matching with a variety of machines such as, conical, wedge-shaped, basket-shaped, V-shaped, cylindrical, etc.


Stainless Steel Perforated Pipes Features:

  • Welded evenly.
  • Light weight, high strength, not so easy to deform, durable.
  • Exact dimensions, high permeability, larger area flow.
  • Excellent corrosion, abrasion, heat and resistance.
  • Little maintenance, longer service life.
  • Reusable after cleaning.

Specification for perforated pipes:

  • Material: stainless steel, carbon steel, copper, brass, chromium.
  • Surface treatment: galvanized, PVC coated, powder coated, polishing.
  • Hole shape: round, square, slot, hexagonal hole and special hole.
  • Hole arrangement: straight, staggered pattern, multiple staggered (only for slot).
  • Pipe thickness: 2–16 mm.
  • Pipe diameter: 6–508 mm.
  • Length of pipe: 0.5–15 m.
  • Fabrication methods: welded or lock seam.
  • Welding types: straight line or spiral welded.

Stainless Steel Perforated Pipes Application:

  • Perforated pipe is used in filtration systems, such as water filter pipe, petrochemical refining, water wells, mining & mineral processing, filter of automobiles internal-combustion engine, medicine, tea filter, air filter, drilling.
  • Perforated pipe is applied to exhaust system such as, perforated exhaust pipe.
  • Perforated pipe with function of support and protection is widely used in underground cable pipe protective, inner duct communication pipe protective, water drainage or water supply pipe protective or sprinkler irrigation pipe, drilling.
  • Perforated filter pipe with good sound insulation is applied to silencer.


People Also search for  Stainless Steel Perforated Pipes -

Perforated Pipes trader, stainless steel Perforated Pipe astm, weight of stainless steel Perforated Pipes per foot, weight of stainless steel Perforated Pipes, Perforated stainless steel Perforated Pipe, stainless steel Perforated Pipes for sale, stainless steel Perforated Pipe weight per foot, stainless steel Perforated tubing grades, stainless steel Perforated Pipe hs code, stainless steel Perforated Pipes weight chart india, stainless steel Perforated tubing metric, stainless steel Perforated tubing properties, stainless steel Perforated Pipe section properties, stainless steel Perforated Pipes supplier in India, exporter of stainless steel Perforated Pipes, 304 stainless steel Perforated Pipes, stainless steel Perforated Pipes distributor, stainless steel Perforated Pipe manufacturer in India, ss seamless Perforated Pipes stockholder in India, seamless Perforated Pipe exporter.

Request
Callback


Additional Information:

  • Item Code: PIPE
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
  • Packaging Details: STANDARD PACKING
Yes! I am Interested

Buttweld Fittings

Buttweld Fittings
  • Buttweld Fittings
  • Buttweld Fittings
Ask For Price
Product Price :Get Latest Price

Product Details:

Size3/4 inch, 3 inch, 1 inch, 2 inch, 1/2 inch
ApplicationPneumatic Connections, Chemical Fertilizer Pipe, Gas Pipe, Structure Pipe
BrandNASCENT
Weld Type
Quantity Per PackAs Per Customer Requirement
Packaging TypeStandard
Type of PipesButtweld
I deal inNew Only
FeaturesCorrosion resistant, Accurate dimensions, Can sustain high pressure & temperature load, Rust proof

Profile Established in the year 2009, NEHA METAL AND ALLOYS is one of the reliable manufacturers and exporter of a qualitative range of buttweld fitting products including Buttweld Elbows, Buttweld Bends, Buttweld Tee, Forge Couplings, Buttweld Reducers, Buttweld Stub End, Pipe Nipples and Buttweld Cap . These are known for their excellent durability, unmatched quality and resistant to corrosion. We have captured the entire market place by offering our flawless range. These fittings are offered in various dimensions and sizes in accordance to the variegated requirements of clients.

Our dedicated team works round the clock to ensure that every individual product that is designed by us is in compliance with customer's requirements and industry standards. We have a wonderful state-of-the-art infrastructure that is incorporated with latest technology and machinery. However, our team team is divided into different departments including production, quality testing, warehouse and packaging. The professionals perform their piece of work with accuracy and thus ensure the timely delivering our products.

Our company aims to achieve all the goals in terms of client satisfaction and success. The products offered by us finds application in diverse industries such as Refineries, Gas Processing, Power Generation, Pharmaceuticals, Steel, Cement, Construction, Engineering and more. We have captured both national and international market and thus has created a niche for ourselves in the industry.Quality Assurance Ever since our establishment, we have been following stringent quality norms. Quality checking is one of the vital aspects of our organization as we check our sourced range strictly to maintain the industry standard. To ensure total quality in our range of Buttweld Fittings we have employed quality analysts who have professional experience in checking the quality of our range of Buttweld Fittings

Some of the testing that our range of Buttweld Fittings undergoes is as follows:
  • Corrosion resistance
  • Durability
  • Tolerance
  • Temperature resistance
  • Chemical resistance
  • Dimensional accuracy
  • Finish
With these quality parameters, we assure our clients international quality range of Buttweld Fittings

Packaging
We understand that packaging plays a significant role in ensuring the quality of products that are either shipped or transported to distant locations. Therefore, to ensure the quality of the products manufactured by us, we have integrated sophisticated packaging facilities within our infrastructure.

The packaging services offered by us are in concurrence with the standard packaging methods and client's packaging specifications. We have a team of industry experts who understand the exact packaging requirement for a specific component enabling us in protecting NEHA METAL AND ALLOYS product from the damages in transit.

Encompassing complete product development to delivery system, we lay special emphasis on the export packaging services offered by us.

On-time Delivery / Shipping Information
We have a long history of manufacturing crucial material and shipping them around the globe just in time. We have a record of delivering of our consignments on-time to our customers based in Australia, Brazil, Canada, Denmark, Germany, Italy, Middle East, UK, USA etc.

Request
Callback
Yes! I am Interested

316 Stainless Steel Pipe

316 Stainless Steel Pipe
    Ask For Price

    Stainless Steel Mirror Pipe

    Stainless Steel Mirror Pipe
      Ask For Price
      X

      Explore More Products

      View All Products




      Reach Us
      Rajesh Bhansali (Proprietor)
      Nascent Pipe & Tubes
      6,Floor-GR,Plot-639, 642, 643,shree Ganesh Krupa C.h.s. Ltd.,dr Deshmukh Lane,V P Road, Girgaon
      Mumbai - 400004, Maharashtra, India


      Call Us


      Send E-mail