Pipes And Tubes

Product Details:

We are the Leading Suppliers & exporters of Alloy Steel Tube. Our range of Alloy Steel Tube is appreciated for their excellent features such as durability, corrosion resistance and high tensile strength.

Alloy Steel Tubes , which is accessible in divergent shaepes and sizes for our very much respected customers. We additionally offer the equivalent in various evaluations, for example, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes, Alloy Steel Tubes and Alloy Steel Tubes. Our Alloy Steel Seamless Tubes ought to be strengthened at 2150 Degree F/2250 Degree F (1175 Degree C/1230 Degree C for something like 15 minutes, which would be further, trailed by water extinguish or air cool contingent upon segment measure. These Alloy Steel Welded Tubes is regularly provided in the arrangement treated condition, following a treatment at 2150 Degree F (1175 Degree C) and fast cooling. Our Alloy Steel EFW Tubes will be manufactured between 2200 Degree F/1600 Degree F (1205 Degree C/870 Degree C). Be that as it may, light producing in these Alloy Steel ERW Tubes might be completed beneath 1200 Degree F (650 Degree C) to improve mechanical properties. Moreover, our Alloy Steel Round Tubes is erosion safe, heat safe and oxidation safe, having the capacity to withstand lessening or unbiased airs and oxidation. These Alloy Steel Square Tubes is too utilized in the synthetic procedure industry for answers, suppresses, impetus bolster lattices, heater astounds, tubing for pyrolysis activities and glimmer drier segments.

Additional Information:

• Packaging Details: STANDARD

Product Details:

A106 PIPE SPECIFICATIONS

A/SA106

NPS 1/4"- 30"
Schedules 10 through 160, STD, XH and XXH

*Total of Cr, Cu, Mo, Ni, and V shall not exceed 1%

Permissible Variations in Wall Thickness

The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.

Process

Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.

Steel cast in ingots or strand cast is permissible.

Hot-finished pipe need not be heat treated.

Cold-drawn pipe shall be heat treated after the final cold draw pass.

Permissible Variations in Weights per Foot

Weight of any length shall not vary more than 10% over and 3.5% under that specified. NOTE -- NPS 4 and smaller -- weighed in lots. Larger sizes shall be weighed separately by length.

 

Mechanical Tests Specified

Tensile Test -- NPS 8 and larger -- either transverse or longitudinal acceptable Smaller than NPS 8 -- weighed in lots. Larger sizes -- by length. Flattening Test -- NPS 2-1/2 and larger. Bending Test (Cold) -- NPS 2 and under.

 

Lengths required shall be specified on order. No "jointers" permitted unless otherwise specified. If no definite lengths required, following practice applies: Single Random -- 17' ~ 24' lengths Double Random -- 36' ~ 44' lengths

Referenced Documents

ASTM A 530/A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

ASTM E 213 Practice for Ultrasonic Examination of Metal Pipe and Tubing

ASTM E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

ASTM E 381 Method of Macroetch testing Steel Bars, Billets, Blooms, and Forgings

ASTM E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

ASME B26.10M Welded and Seamless Wrought Steel Pipe

General Information

Orders for material under this specification should include the following, as required, to describe the desired material adequately:

 

Additional Information:

• Item Code: carbonsteelpipes
• Delivery Time: 5-10DAYS

Product Details:

Stock Pipe & Fittings AL-6XN Pipe Stock Size: Sch10 & Sch40 thru 12" AL-6XN Fittings/Flanges: thru 8" Specifications: UNS N08367 ASME SB-688, ASME SA-240, ASME SB-675, ASME SA-312, ASME SB-676, ASME SA-249, ASME SB-691, ASME SA-479, ASME SB-462, ASME SA-182, ASME SB-564, ASME SB-366 ASTM B688, ASTM A240, ASTM B675, ASTM A312, ASTM B676, ASTM A249, ASTM B804, ASTM B691, ASTM A479, ASTM B462, ASTM A182, ASTM B564, ASTM B366, ASTM B472 NACE MR-0175

Properties High temperature metals or high temp alloys consist of Inconel/Incoloy, Nickel and Superalloys. Machining Inconel metals are difficult metals to shape and machine using traditional techniques due to rapid work hardening. After the first machining pass, work hardening tends to plastically deform either the workpiece or the tool on subsequent passes. For this reason, age-hardened Inconels such as 718 are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required. Alternatively, the majority of the machining can be performed with the workpiece in a solutionized form, with only the final steps being performed after age-hardening. External threads are machined using a lathe to "single point" the threads, or by rolling the threads using a screw machine. Holes with internal threads are made by welding or brazing threaded inserts made of stainless steel. Cutting of plate is often done with a waterjet cutter. Internal threads can also be cut by single point method on lathe, or by threadmilling on a machining center. Joining Welding inconel alloys is difficult due to cracking and microstructural segregation of alloying elements in the heat affected zone. However, several alloys have been designed to overcome these problems.

Inconel Fittings have an excellent mechanical properties and provide good resistance to oxidation. We offer inconel 625 rod, inconel 601 rod, inconel 800 rod, inconel 825 rod and inconel 600 rod. These pipes find extensive application in furnace muffles, electronic components, heat treating equipment, steam generator tubing, heat exchangers, etc.

Length : Single random, double random & cut length

Grades : UNS 8800 (inconel 800) uns 8825 (inconel 825) uns 6600 (inconel 600) uns 6601 (inconel 601) uns 6625 (inconel 625)

Product Details:

Alloy 904L Pipes

 

 

Additional Information:

• Packaging Details: STANDARD PACKING

Product Details:

Stainless Steel Pipe & Tube

Stainless steel pipe has many remarkable attributes including corrosion resistance, high strength, durability, and machinability. Nascent Pipe And Tubes offers stainless steel pipe and tube in both seamless and welded specifications. Our stainless steel products are available in outer diameters (OD) of ¼” – 48” and wall thicknesses up through 1.500"

Carbon Pipe & Tube

Carbon steel is more commonly used than any other metal, and has long been admired for its versatility and low cost. As a specialist in scheduled and non-scheduled heavy wall pipe and tube, Nascent Pipe And Tubes stocks a complete size range of carbon steel pipe and tube. We offer multiple grades of carbon steel covered by ASTM, ASME and API specifications..

NICKEL TUBING

Nascent Pipe And Tubes stock seamless nickel tubing for both aerospace and commercial applications. Nickel base alloys offer high strength, high temperature and heat resistance.

Many of our tubing products are supplied for applications in the following industries:

 

• Chemical and petrochemical
• Power generation
• Biotechnology
• Medical technology
• Oil and gas
• Environmental – waste treatment, waste incineration
• Coal and Gas processing
• Food processing
• Fertilizer production
• Aerospace parts and components

Alloy designations:

Alloy 20, 200, C-276, 400, 600, 625, 718, and HX

Alloy Pipe & Tube

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance, toughness, and wear resistance. As suppliers of alloy steel seamless and welded pipe, Nascent Pipe And Tubes specializes in "chrome moly" piping used extensively in power plants throughout the world. Our wide selection of SA335 pipe is available in grades P5, P9, P11, P22

Additional Information:

• Item Code: TUBES
• Port of Dispatch: NHAVA SHEVA, MUMBAI, INDIA
• Production Capacity: 200 MT MONTH
• Delivery Time: ONE MONTH
• Packaging Details: SEAWORTHY IN WOODEN BOXES

Product Details:

Stainless Steel IBR Pipes & Tubes, Alloy Steel IBR Pipes & Tubes Manufacturer, Exporter & Suppliers.
ASTM 312 / 213, A 53, A106, A333, 335, A 179 / A 210, A/SA 213 IBR Pipes & Tubes Suppliers in India.

Nascent Pipes & Tubes is Manufacturers, Supplier and Exporters of a wide extent of IBR Pipes and Tubes in Mumbai, India. We are made these Pipes and Tubes that using superb rough materials. We are made these things using the propelled machines and investigate the quality. These are available in various size, thickness and specific as indicated by the clients essentials. These IBR Pipes and Tubes used in various application industry, for instance, oil and gas, petrochemical, shipbuilding, Nuclear Power Plants, Chemical Industries, Fertilizers Plants, desalination, water treatment, etc we are make the high survey things to our clients.

Specification :

Additional Information:

• Packaging Details: STANDARD PACKING

Product Details:

Material Specification:

• Dimension Standard : ASTM, ASME
• Specification : A268 / SA 268
• Grade : SS 410
• Size : 1/4" NB TO 8" NB, Thickness : 01MM to 12MM
• Schedule : Sch 20, Sch 30, Sch 40, STD, Sch 40, Sch 60, Sch 80, XS, Sch 120, Sch 140, Sch 160, XXS
• Length : 6 Meter, 12Meter & As per customer's requirement.
• Form : Round, Square, Rectangular Etc
• End : Plain, Bevelled, Threaded Ends

Product Details:

Jindal 304 Stainless Steel Pipe.

Jindal Stainless steel 304 pipes are ERW welded as per ASTM – 269/JIS 3448. And 316 pipes are made in EN 10312

Key Advantage Of Stainless Less Integrated Plumbing System

• Corrosion Protection
• Hygienic
• Low-maintenance
• Light weight
• Higher pressure of liquids and gases
• Smoother stainless steel bore
• No fire Risk
• Quick/ease of installation
• Extended Apartment life to 200 years
• Earthquake resistant

Applications

• Hot and cold Water
• Potable water
• Sprinklers
• Fire - fighting

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhava Sheva Port
• Packaging Details: Standard Packing